Barry Fussell

Barry Fussell
PROFESSOR
Mechanical Engineering
Phone: (603) 862-1807
Office: Mechanical Engineering, Kingsbury Hall Rm W121, Durham, NH 03824
Website: Full profile: FindScholars@UNH
Barry Fussell

Prof. Fussell has been with the ME department at UNH since 1987. His work experience outside the university includes 2 years as a product engineer for the Timken Company, a summer working for the Air Force as a visiting scientist, and a sabbatical semester as a visiting professor at the EPFL in Lausanne, Switzerland. He currently maintains an active research program and co-directs the Design and Manufacturing Laboratory with Professor Robert Jerard (Design & Manufacturing Lab website).

Education

  • Ph.D., Mechanical Engineering, Ohio State University
  • M.S., Mechanical Engineering, Ohio State University
  • B.S., Mechanical Engineering, Ohio State University

Courses Taught

  • ECE/ME 944: Nonlinear Control Systems
  • ME 670: Sys Modeling Simulation&Contrl
  • ME 747: Exprmtl Measurement & Modeling
  • ME 773/873: Electromechanical Analysis
  • ME 797: Honors Seminar
  • ME 999: Doctoral Research

Selected Publications

Nouri, M., Fussell, B. K., Ziniti, B. L., & Linder, E. (2015). Real-time tool wear monitoring in milling using a cutting condition independent method. International Journal of Machine Tools and Manufacture, 89, 1-13. doi:10.1016/j.ijmachtools.2014.10.011

Harding, M. J., Fussell, B. K., Gullison, M. A., Benoît, J., & de Alba, P. A. (2014). Design and Testing of a Debris Flow ‘Smart Rock’. Geotechnical Testing Journal, 37(5), 20130172. doi:10.1520/gtj20130172

Fussell, B. K., Jerard, R. B., & Hemmett, J. G. (2003). Modeling of cutting geometry and forces for 5-axis sculptured surface machining. Computer-Aided Design, 35(4), 333-346. doi:10.1016/s0010-4485(02)00055-6

Fussell, B. K., Jerard, R. B., & Hemmett, J. G. (2001). Robust Feedrate Selection for 3-Axis NC Machining Using Discrete Models. Journal of Manufacturing Science and Engineering, 123(2), 214-224. doi:10.1115/1.1365398

Cho, C. P., Fussell, B. K., & Hung, J. Y. (1996). A novel integrated electric motor/pump for underwater applications. Journal of Applied Physics, 79(8), 5548. doi:10.1063/1.362304

Sherwood, J. A., Fussell, B. K., Edwards, W. R., Gross, T. S., & Watt, D. W. (1995). Study of the pressure distribution on an aircraft tire-wheel interface. Journal of Aircraft, 32(5), 921-928. doi:10.2514/3.46819

Cho, C. P., Fussell, B. K., & Hung, J. Y. (1993). Detent torque and axial force effects in a dual air-gap axial-field brushless motor. IEEE Transactions on Magnetics, 29(6), 2416-2418. doi:10.1109/20.280998

Fussell, B. K., & Srinivasan, K. (1991). Adaptive control of force in end milling operations— an evaluation of available algorithms. Journal of Manufacturing Systems, 10(1), 8-20. doi:10.1016/0278-6125(91)90043-2

Fussell, B. K., & Srinivasan, K. (1989). An Investigation of the End Milling Process Under Varying Machining Conditions. Journal of Engineering for Industry, 111(1), 27-36. doi:10.1115/1.3188729

View All

Most Cited Publications